Depending on the yacht size – we have various options available for you. We can provide an adjustable yacht slide from the main deck, middle deck, upper deck, or sundeck for most of the motor and sailing yachts between 20m to 100+ m LOA.

For the best fit, let us know the height from the water level up to the top of the rail on the deployment deck. We can provide a yacht slide up to 9.0 m height.

A yacht slide will be provided using your yacht’s actual measurements, however the structure needs to stay flexible and adaptable, meaning a wide tolerance is required due to waves and yacht’s movement at anchor.

Our slides come in steps of 50cm and tolerate the height of -1.0 m or + 1.0 m using slide bases. For example a 4.5 m slide will fit heights from 3.5 up to 5.5 m height (from WL to the top of the rail).

For setting up slides from the main deck and the upper deck – a minimum of 2 crew members are required. For larger yacht slides, 4 crew members – 2 on each side – are needed to lift the structure from the water, up the side of the yacht, and over the railing.

A deck crane is helpful, if close to the deployment area, but not essential. Yes – it’s difficult, but the process will be easier each time around.

If you intend to set-up a yacht slide from the bow, let us know this in advance, as additional measurements are required for the best fit.

Alternatively, if small children will be onboard, a slide from the main deck will provide sufficient fun. Some of the aquapark products can also be a nice alternative to the yacht slide as they float independently, tied to the yacht stern quarter.

While the yacht slide is in operation, a constant water flow needs to be provided for safe sliding. Be naughty and use a bit of bio-degradable soap…

Several 220 V pumps are available to reduce the inflation/deflation time. Average set-up time is between 30 – 45 min. Once set-up, a lot of fun is guaranteed!